This inheritance list is sorted roughly, but not completely, alphabetically:

[detail level 1234]

▼Cgenfit::AbsBField	Abstract Interface to magnetic fields in GENFIT
Cgenfit::ConstField	Constant Magnetic field
▼Cgenfit::AbsFinitePlane	Abstract base class for finite detector planes
Cgenfit::RectangularFinitePlane	Rectangular finite plane
▼Cgenfit::AbsFitter	Abstract base class for fitters
▼Cgenfit::AbsKalmanFitter	Abstract base class for Kalman fitter and derived fitting algorithms
Cgenfit::DAF	Determinstic Annealing Filter (DAF) implementation
Cgenfit::KalmanFitter	Simple Kalman filter implementation
Cgenfit::KalmanFitterRefTrack	Kalman filter implementation with linearization around a reference track
Cgenfit::GFGbl	Generic GBL implementation
Cgenfit::GblFitter	Generic GBL implementation
Cgenfit::AbsMeasurementProducer< measurement_T >	Abstract interface class for MeasurementProducer
▼Cgenfit::AbsMeasurementProducer< genfit::AbsMeasurement >
Cgenfit::MeasurementProducer< hit_T, measurement_T >	Template class for a measurement producer module
Cgbl::BorderedBandMatrix	(Symmetric) Bordered Band Matrix
▼Cstd::exception
Cgenfit::Exception	Exception class for error handling in GENFIT (provides storage for diagnostic information)
Cgenfit::ExtrapStep	Helper for RKTrackRep
Cgenfit::fieldCache	Cache B field at a position. Used by FieldManager
Cgenfit::FieldManager	Singleton which provides access to magnetic field maps
▼Cgenfit::FitStatus	Class where important numbers and properties of a fit can be stored
Cgenfit::GblFitStatus	FitStatus for use with GblFitter
Cgenfit::KalmanFitStatus	FitStatus for use with AbsKalmanFitter implementations
Cgbl::GblData	Data (block) for independent scalar measurement
Cgbl::GblPoint	Point on trajectory
Cgenfit::GblTrackSegmentController	TrackSegmentController for use with GblFitter
Cgbl::GblTrajectory	GBL trajectory
Cgenfit::GFRaveVertexFactory	Vertex factory for producing GFRaveVertex objects from Track objects
Cgenfit::ICalibrationParametersDerivatives	Abstract base class to establish an interface between physical representation of the detector for alignment/calibration and (fitted) state on genfit::Track
▼Crave::MagneticField
Cgenfit::GFRaveMagneticField	GFRaveMagneticField class Uses the FieldManager to provide a magnetic field to rave
Cgenfit::Material
Cgenfit::MaterialEffects	Stepper and energy loss/noise matrix calculation
Cgenfit::MatStep	Simple struct containing MaterialProperties and stepsize in the material
Cgenfit::MeasurementFactory< measurement_T >	Factory object to create AbsMeasurement objects from digitized and clustered data
Cgbl::MilleBinary	Millepede-II (binary) record
▼Crave::Propagator
Cgenfit::GFRavePropagator	GFRavePropagator class
Cgenfit::PruneFlags	Info which information has been pruned from the Track
Cgenfit::RKMatrix< nRows, nCols >
Cgenfit::RKStep	Helper for RKTrackRep
Cgenfit::SharedPlanePtrCreator
▼Cgenfit::StateOnPlane	A state with arbitrary dimension defined in a DetPlane
▼Cgenfit::MeasuredStateOnPlane	StateOnPlane with additional covariance matrix
Cgenfit::KalmanFittedStateOnPlane	MeasuredStateOnPlane with additional info produced by a Kalman filter or DAF
Cgenfit::MeasurementOnPlane	Measured coordinates on a plane
Cgenfit::ReferenceStateOnPlane	StateOnPlane with linearized transport to that ReferenceStateOnPlane from previous and next ReferenceStateOnPlane
Cgenfit::StepLimits	Helper to store different limits on the stepsize for the RKTRackRep
▼CTNamed
Cgenfit::EventDisplay	Event display designed to run with Genfit
▼CTObject
▼Cgenfit::AbsFitterInfo	This class collects all information needed and produced by a specific AbsFitter and is specific to one AbsTrackRep of the Track
Cgenfit::GblFitterInfo	Collects information needed and produced by a GblFitter/GBL and is specific to one AbsTrackRep of the Track
Cgenfit::KalmanFitterInfo	Collects information needed and produced by a AbsKalmanFitter implementations and is specific to one AbsTrackRep of the Track
▼Cgenfit::AbsHMatrix	HMatrix for projecting from AbsTrackRep parameters to measured parameters in a DetPlane
Cgenfit::HMatrixPhi	AbsHMatrix implementation for one-dimensional MeasurementOnPlane and RKTrackRep parameterization
Cgenfit::HMatrixU	AbsHMatrix implementation for one-dimensional MeasurementOnPlane and RKTrackRep parameterization
Cgenfit::HMatrixUV	AbsHMatrix implementation for two-dimensional MeasurementOnPlane and RKTrackRep parameterization
Cgenfit::HMatrixUnit	AbsHMatrix implementation for 5-dimensional MeasurementOnPlane and RKTrackRep parameterization
Cgenfit::HMatrixV	AbsHMatrix implementation for one-dimensional MeasurementOnPlane and RKTrackRep parameterization
▼Cgenfit::AbsMaterialInterface	Abstract base class for geometry interfacing
Cgenfit::TGeoMaterialInterface	AbsMaterialInterface implementation for use with ROOT's TGeoManager
▼Cgenfit::AbsMeasurement	Contains the measurement and covariance in raw detector coordinates
Cgenfit::FullMeasurement	Measurement class implementing a measurement of all track parameters
Cgenfit::PlanarMeasurement	Measurement class implementing a planar hit geometry (1 or 2D)
▼Cgenfit::SpacepointMeasurement	Class for measurements implementing a space point hit geometry
Cgenfit::ProlateSpacepointMeasurement	Class for measurements implementing a space point hit geometry with a very prolate form of the covariance matrix
Cgenfit::mySpacepointMeasurement	Example class for a spacepoint measurement which can be created from mySpacepointDetectorHit via the MeasurementFactory
▼Cgenfit::WireMeasurement	Class for measurements in wire detectors (Straw tubes and drift chambers) which do not measure the coordinate along the wire
Cgenfit::WirePointMeasurement	Class for measurements in wire detectors (Straw tubes and drift chambers) which can measure the coordinate along the wire
Cgenfit::WireMeasurementNew	Class for measurements in wire detectors (Straw tubes and drift chambers) which do not measure the coordinate along the wire
▼Cgenfit::AbsTrackRep	Abstract base class for a track representation
▼Cgenfit::RKTrackRep	AbsTrackRep with 5D track parameterization in plane coordinates: (q/p, u', v', u, v)
Cgenfit::MplTrackRep
Cgenfit::DetPlane	Detector plane
Cgenfit::GFRaveTrackParameters	GFRaveTrackParameters class Contains a pointer to the original genfit::Track, the weight of the track in the vertex, and smoothed (with the vertex information) state and covariance of the track
Cgenfit::GFRaveVertex	GFRaveVertex class
Cgenfit::HelixTrackModel	Helix track model for testing purposes
Cgenfit::MeasurementCreator	Create different measurement types along a HelixTrackModel for testing purposes
Cgenfit::ThinScatterer	Thin or thick scatterer
Cgenfit::Track	Collection of TrackPoint objects, AbsTrackRep objects and FitStatus objects
Cgenfit::TrackCand	Track candidate – seed values and indices
▼Cgenfit::TrackCandHit	Hit object for use in TrackCand. Provides IDs and sorting parameters
Cgenfit::WireTrackCandHit	Hit object for use in TrackCand. Provides additional left/right parameter
Cgenfit::TrackPoint	Object containing AbsMeasurement and AbsFitterInfo objects
Cgenfit::mySpacepointDetectorHit	Example class for a spacepoint detector hit
Cgenfit::trackAndState	Simple struct containing a Track pointer and a MeasuredStateOnPlane. Used in GFRave
Cgenfit::TrackPointComparator	Helper class for TrackPoint sorting, used in Track::sort()
Cgbl::VMatrix	Simple Matrix based on std::vector<double>
Cgbl::VSymMatrix	Simple symmetric Matrix based on std::vector<double>
Cgbl::VVector	Simple Vector based on std::vector<double>