Defines for I/O streams used for error and debug printing. More...

Namespaces
namespace	RKTools
	Array matrix multiplications used in RKTrackRep.

namespace	tools

Classes
class	AbsBField
	Abstract Interface to magnetic fields in GENFIT. More...

class	AbsFinitePlane
	Abstract base class for finite detector planes. More...

class	AbsFitter
	Abstract base class for fitters. More...

class	AbsFitterInfo
	This class collects all information needed and produced by a specific AbsFitter and is specific to one AbsTrackRep of the Track. More...

class	AbsHMatrix
	HMatrix for projecting from AbsTrackRep parameters to measured parameters in a DetPlane. More...

class	AbsKalmanFitter
	Abstract base class for Kalman fitter and derived fitting algorithms. More...

class	AbsMaterialInterface
	Abstract base class for geometry interfacing. More...

class	AbsMeasurement
	Contains the measurement and covariance in raw detector coordinates. More...

class	AbsMeasurementProducer
	Abstract interface class for MeasurementProducer. More...

class	AbsTrackRep
	Abstract base class for a track representation. More...

class	ConstField
	Constant Magnetic field. More...

class	DAF
	Determinstic Annealing Filter (DAF) implementation. More...

class	DetPlane
	Detector plane. More...

class	EventDisplay
	Event display designed to run with Genfit. More...

class	Exception
	Exception class for error handling in GENFIT (provides storage for diagnostic information) More...

struct	ExtrapStep
	Helper for RKTrackRep. More...

struct	fieldCache
	Cache B field at a position. Used by FieldManager. More...

class	FieldManager
	Singleton which provides access to magnetic field maps. More...

class	FitStatus
	Class where important numbers and properties of a fit can be stored. More...

class	FullMeasurement
	Measurement class implementing a measurement of all track parameters. More...

class	GblFitStatus
	FitStatus for use with GblFitter. More...

class	GblFitter
	Generic GBL implementation. More...

class	GblFitterInfo
	Collects information needed and produced by a GblFitter/GBL and is specific to one AbsTrackRep of the Track. More...

class	GblTrackSegmentController
	TrackSegmentController for use with GblFitter. More...

class	GFGbl
	Generic GBL implementation. More...

class	GFRaveMagneticField
	GFRaveMagneticField class Uses the FieldManager to provide a magnetic field to rave. More...

class	GFRavePropagator
	GFRavePropagator class. More...

class	GFRaveTrackParameters
	GFRaveTrackParameters class Contains a pointer to the original genfit::Track, the weight of the track in the vertex, and smoothed (with the vertex information) state and covariance of the track. More...

class	GFRaveVertex
	GFRaveVertex class. More...

class	GFRaveVertexFactory
	Vertex factory for producing GFRaveVertex objects from Track objects. More...

class	HelixTrackModel
	Helix track model for testing purposes. More...

class	HMatrixPhi
	AbsHMatrix implementation for one-dimensional MeasurementOnPlane and RKTrackRep parameterization. More...

class	HMatrixU
	AbsHMatrix implementation for one-dimensional MeasurementOnPlane and RKTrackRep parameterization. More...

class	HMatrixUnit
	AbsHMatrix implementation for 5-dimensional MeasurementOnPlane and RKTrackRep parameterization. More...

class	HMatrixUV
	AbsHMatrix implementation for two-dimensional MeasurementOnPlane and RKTrackRep parameterization. More...

class	HMatrixV
	AbsHMatrix implementation for one-dimensional MeasurementOnPlane and RKTrackRep parameterization. More...

class	ICalibrationParametersDerivatives
	Abstract base class to establish an interface between physical representation of the detector for alignment/calibration and (fitted) state on genfit::Track. More...

class	KalmanFitStatus
	FitStatus for use with AbsKalmanFitter implementations. More...

class	KalmanFittedStateOnPlane
	MeasuredStateOnPlane with additional info produced by a Kalman filter or DAF. More...

class	KalmanFitter
	Simple Kalman filter implementation. More...

class	KalmanFitterInfo
	Collects information needed and produced by a AbsKalmanFitter implementations and is specific to one AbsTrackRep of the Track. More...

class	KalmanFitterRefTrack
	Kalman filter implementation with linearization around a reference track. More...

struct	Material

class	MaterialEffects
	Stepper and energy loss/noise matrix calculation. More...

struct	MatStep
	Simple struct containing MaterialProperties and stepsize in the material. More...

class	MeasuredStateOnPlane
	StateOnPlane with additional covariance matrix. More...

class	MeasurementCreator
	Create different measurement types along a HelixTrackModel for testing purposes. More...

class	MeasurementFactory
	Factory object to create AbsMeasurement objects from digitized and clustered data. More...

class	MeasurementOnPlane
	Measured coordinates on a plane. More...

class	MeasurementProducer
	Template class for a measurement producer module. More...

class	MplTrackRep

class	mySpacepointDetectorHit
	Example class for a spacepoint detector hit. More...

class	mySpacepointMeasurement
	Example class for a spacepoint measurement which can be created from mySpacepointDetectorHit via the MeasurementFactory. More...

class	PlanarMeasurement
	Measurement class implementing a planar hit geometry (1 or 2D). More...

class	ProlateSpacepointMeasurement
	Class for measurements implementing a space point hit geometry with a very prolate form of the covariance matrix. More...

struct	PruneFlags
	Info which information has been pruned from the Track. More...

class	RectangularFinitePlane
	Rectangular finite plane. More...

class	ReferenceStateOnPlane
	StateOnPlane with linearized transport to that ReferenceStateOnPlane from previous and next ReferenceStateOnPlane More...

struct	RKMatrix

struct	RKStep
	Helper for RKTrackRep. More...

class	RKTrackRep
	AbsTrackRep with 5D track parameterization in plane coordinates: (q/p, u', v', u, v) More...

class	SharedPlanePtrCreator

class	SpacepointMeasurement
	Class for measurements implementing a space point hit geometry. More...

class	StateOnPlane
	A state with arbitrary dimension defined in a DetPlane. More...

class	StepLimits
	Helper to store different limits on the stepsize for the RKTRackRep. More...

class	TGeoMaterialInterface
	AbsMaterialInterface implementation for use with ROOT's TGeoManager. More...

class	ThinScatterer
	Thin or thick scatterer. More...

class	Track
	Collection of TrackPoint objects, AbsTrackRep objects and FitStatus objects. More...

struct	trackAndState
	Simple struct containing a Track pointer and a MeasuredStateOnPlane. Used in GFRave. More...

class	TrackCand
	Track candidate – seed values and indices. More...

class	TrackCandHit
	Hit object for use in TrackCand. Provides IDs and sorting parameters. More...

class	TrackPoint
	Object containing AbsMeasurement and AbsFitterInfo objects. More...

class	TrackPointComparator
	Helper class for TrackPoint sorting, used in Track::sort(). More...

class	WireMeasurement
	Class for measurements in wire detectors (Straw tubes and drift chambers) which do not measure the coordinate along the wire. More...

class	WireMeasurementNew
	Class for measurements in wire detectors (Straw tubes and drift chambers) which do not measure the coordinate along the wire. More...

class	WirePointMeasurement
	Class for measurements in wire detectors (Straw tubes and drift chambers) which can measure the coordinate along the wire. More...

class	WireTrackCandHit
	Hit object for use in TrackCand. Provides additional left/right parameter. More...

Typedefs
typedef std::shared_ptr< genfit::DetPlane >	SharedPlanePtr
	Shared Pointer to a DetPlane.

typedef RKMatrix< 1, 3 >	M1x3

typedef RKMatrix< 1, 4 >	M1x4

typedef RKMatrix< 1, 7 >	M1x7

typedef RKMatrix< 5, 5 >	M5x5

typedef RKMatrix< 6, 6 >	M6x6

typedef RKMatrix< 7, 7 >	M7x7

typedef RKMatrix< 6, 5 >	M6x5

typedef RKMatrix< 7, 5 >	M7x5

typedef RKMatrix< 5, 6 >	M5x6

typedef RKMatrix< 5, 7 >	M5x7

Enumerations
enum	eFitterType { SimpleKalman , RefKalman , DafSimple , DafRef }

enum	eMultipleMeasurementHandling { weightedAverage , unweightedAverage , weightedClosestToReference , unweightedClosestToReference , weightedClosestToPrediction , unweightedClosestToPrediction , weightedClosestToReferenceWire , unweightedClosestToReferenceWire , weightedClosestToPredictionWire , unweightedClosestToPredictionWire }

enum	StepLimitType { stp_noLimit = 0 , stp_fieldCurv , stp_momLoss , stp_sMax , stp_sMaxArg , stp_boundary , stp_plane , ENUM_NR_ITEMS }

enum	eMeasurementType { Pixel = 0 , Spacepoint , ProlateSpacepoint , StripU , StripV , StripUV , Wire , WirePoint , nMeasurementTypes }

Functions
bool	operator== (const DetPlane &lhs, const DetPlane &rhs)

bool	operator!= (const DetPlane &lhs, const DetPlane &rhs)

bool	operator== (const Material &lhs, const Material &rhs)

bool	operator!= (const Material &lhs, const Material &rhs)

MeasuredStateOnPlane	calcAverageState (const MeasuredStateOnPlane &forwardState, const MeasuredStateOnPlane &backwardState)
	Calculate weighted average between two MeasuredStateOnPlanes.

bool	operator== (const TrackCand &lhs, const TrackCand &rhs)

bool	operator== (const TrackCandHit &lhs, const TrackCandHit &rhs)

AbsFitterInfo *	new_clone (const AbsFitterInfo &a)
	Needed for boost cloneability:

std::vector< rave::Track >	GFTracksToTracks (const std::vector< genfit::Track * > &GFTracks, std::vector< genfit::MeasuredStateOnPlane * > *GFStates, std::map< int, genfit::trackAndState > &IdGFTrackStateMap, int startID)

rave::Track	GFTrackToTrack (trackAndState trackAndState, int id, std::string tag)

void	setData (const rave::Track &orig, MeasuredStateOnPlane *state)

GFRaveVertex *	RaveToGFVertex (const rave::Vertex &raveVertex, const std::map< int, genfit::trackAndState > &IdGFTrackStateMap)

void	RaveToGFVertices (std::vector< GFRaveVertex * > *GFVertices, const std::vector< rave::Vertex > &raveVertices, const std::map< int, genfit::trackAndState > &IdGFTrackStateMap)

SharedPlanePtr	PlaneToGFDetPlane (const ravesurf::Plane &rplane)

TVector3	Point3DToTVector3 (const rave::Point3D &v)

TVector3	Vector3DToTVector3 (const rave::Vector3D &v)

TMatrixDSym	Covariance3DToTMatrixDSym (const rave::Covariance3D &ravecov)

TVectorD	Vector6DToTVectorD (const rave::Vector6D &ravevec)

TMatrixDSym	Covariance6DToTMatrixDSym (const rave::Covariance6D &ravecov)

rave::Point3D	TVector3ToPoint3D (const TVector3 &vec)

rave::Covariance3D	TMatrixDSymToCovariance3D (const TMatrixDSym &matrix)

double	MeanExcEnergy_get (int Z)

double	MeanExcEnergy_get (TGeoMaterial *)

double	MeanExcEnergy_get (int Z, bool logs=false)

Variables
std::ostream	debugOut

std::ostream	errorOut

std::ostream	printOut

const int	c_monopolePDGCode = 99666

const int	MeanExcEnergy_NELEMENTS = 93

const double	MeanExcEnergy_vals [MeanExcEnergy_NELEMENTS]

const double	MeanExcEnergy_logs [MeanExcEnergy_NELEMENTS]

Detailed Description

Defines for I/O streams used for error and debug printing.

Collection of converter functions.

Namespace for the general broken lines package.

Matrix inversion tools.

Typedef Documentation

◆ M1x3

typedef RKMatrix<1, 3> genfit::M1x3

Definition at line 66 of file RKTools.h.

◆ M1x4

typedef RKMatrix<1, 4> genfit::M1x4

Definition at line 67 of file RKTools.h.

◆ M1x7

typedef RKMatrix<1, 7> genfit::M1x7

Definition at line 68 of file RKTools.h.

◆ M5x5

typedef RKMatrix<5, 5> genfit::M5x5

Definition at line 69 of file RKTools.h.

◆ M5x6

typedef RKMatrix<5, 6> genfit::M5x6

Definition at line 74 of file RKTools.h.

◆ M5x7

typedef RKMatrix<5, 7> genfit::M5x7

Definition at line 75 of file RKTools.h.

◆ M6x5

typedef RKMatrix<6, 5> genfit::M6x5

Definition at line 72 of file RKTools.h.

◆ M6x6

typedef RKMatrix<6, 6> genfit::M6x6

Definition at line 70 of file RKTools.h.

◆ M7x5

typedef RKMatrix<7, 5> genfit::M7x5

Definition at line 73 of file RKTools.h.

◆ M7x7

typedef RKMatrix<7, 7> genfit::M7x7

Definition at line 71 of file RKTools.h.

◆ SharedPlanePtr

typedef std::shared_ptr< genfit::DetPlane > genfit::SharedPlanePtr

Shared Pointer to a DetPlane.

Ownership can be shared, e.g between multiple StateOnPlane objects. The DetPlane will automatically be deleted, if no owner remains.

Definition at line 40 of file SharedPlanePtr.h.

Enumeration Type Documentation

◆ eFitterType

enum genfit::eFitterType

Enumerator
SimpleKalman
RefKalman
DafSimple
DafRef

Definition at line 41 of file EventDisplay.h.

◆ eMeasurementType

enum genfit::eMeasurementType

Enumerator
Pixel
Spacepoint
ProlateSpacepoint
StripU
StripV
StripUV
Wire
WirePoint
nMeasurementTypes

Definition at line 42 of file MeasurementCreator.h.

◆ eMultipleMeasurementHandling

enum genfit::eMultipleMeasurementHandling

Enumerator
weightedAverage	weighted average between measurements; used by DAF
unweightedAverage	average between measurements, all weighted with 1
weightedClosestToReference	closest to reference, weighted with its weight_
unweightedClosestToReference	closest to reference, weighted with 1
weightedClosestToPrediction	closest to prediction, weighted with its weight_
unweightedClosestToPrediction	closest to prediction, weighted with 1
weightedClosestToReferenceWire	if corresponding TrackPoint has one WireMeasurement, select closest to reference, weighted with its weight_. Otherwise use weightedAverage.
unweightedClosestToReferenceWire	if corresponding TrackPoint has one WireMeasurement, select closest to reference, weighted with 1. Otherwise use unweightedAverage.
weightedClosestToPredictionWire	if corresponding TrackPoint has one WireMeasurement, select closest to prediction, weighted with its weight_. Otherwise use weightedAverage.
unweightedClosestToPredictionWire	if corresponding TrackPoint has one WireMeasurement, select closest to prediction, weighted with 1. Otherwise use unweightedAverage. Recommended for KalmanFitter to 'resolve' l/r ambiguities

Definition at line 35 of file AbsKalmanFitter.h.

◆ StepLimitType

enum genfit::StepLimitType

Enumerator
stp_noLimit
stp_fieldCurv
stp_momLoss
stp_sMax
stp_sMaxArg
stp_boundary
stp_plane
ENUM_NR_ITEMS

Definition at line 33 of file StepLimits.h.

Function Documentation

◆ calcAverageState()

MeasuredStateOnPlane genfit::calcAverageState	(	const MeasuredStateOnPlane &	forwardState,
		const MeasuredStateOnPlane &	backwardState )

Calculate weighted average between two MeasuredStateOnPlanes.

Definition at line 76 of file MeasuredStateOnPlane.cc.

References genfit::StateOnPlane::getAuxInfo(), genfit::MeasuredStateOnPlane::getCov(), genfit::StateOnPlane::getPlane(), genfit::StateOnPlane::getRep(), genfit::StateOnPlane::getState(), genfit::tools::invertMatrix(), genfit::tools::QR(), genfit::MeasuredStateOnPlane::setCov(), genfit::StateOnPlane::setState(), and genfit::tools::transposedInvert().

Referenced by genfit::KalmanFitterInfo::getFittedState().

◆ Covariance3DToTMatrixDSym()

TMatrixDSym genfit::Covariance3DToTMatrixDSym ( const rave::Covariance3D & ravecov )

Definition at line 243 of file GFRaveConverters.cc.

Referenced by RaveToGFVertex().

◆ Covariance6DToTMatrixDSym()

TMatrixDSym genfit::Covariance6DToTMatrixDSym ( const rave::Covariance6D & ravecov )

Definition at line 279 of file GFRaveConverters.cc.

Referenced by RaveToGFVertex(), and setData().

◆ GFTracksToTracks()

std::vector< rave::Track > genfit::GFTracksToTracks	(	const std::vector< genfit::Track * > &	GFTracks,
		std::vector< genfit::MeasuredStateOnPlane * > *	GFStates,
		std::map< int, genfit::trackAndState > &	IdGFTrackStateMap,
		int	startID = 0 )

Convert a vector of genfit::Tracks to rave::Tracks also builds a map of unique ids to genfit::Tracks; These ids are stored in the rave::tracks. They are counted from startID. The map has to be passed to the GFRavePropagator, so that it can access the trackreps of the genfit::Tracks corresponding to the rave::tracks. If a vector of MeasuredStateOnPlane is provided, they will be used (instead of the tracks fitted states) to calculate the rave::Track parameters. Ownership over MeasuredStateOnPlane will be taken.

Definition at line 36 of file GFRaveConverters.cc.

References GFTrackToTrack().

Referenced by genfit::GFRaveVertexFactory::findVertices(), and genfit::GFRaveVertexFactory::findVertices().

◆ GFTrackToTrack()

rave::Track genfit::GFTrackToTrack	(	trackAndState	trackAndState,
		int	id,
		std::string	tag )

Definition at line 83 of file GFRaveConverters.cc.

References genfit::FitStatus::getCharge(), genfit::FitStatus::getChi2(), genfit::Track::getFitStatus(), genfit::Track::getFittedState(), genfit::FitStatus::getNdf(), genfit::MeasuredStateOnPlane::getPosMomCov(), genfit::FitStatus::isFitConverged(), and genfit::trackAndState::track_.

Referenced by genfit::GFRavePropagator::closestTo(), GFTracksToTracks(), and genfit::GFRavePropagator::to().

◆ MeanExcEnergy_get() [1/3]

double genfit::MeanExcEnergy_get ( int Z )

Referenced by genfit::TGeoMaterialInterface::getMaterialParameters(), and MeanExcEnergy_get().

◆ MeanExcEnergy_get() [2/3]

double genfit::MeanExcEnergy_get	(	int	Z,
		bool	logs = false )

Definition at line 245 of file TGeoMaterialInterface.cc.

References MeanExcEnergy_logs, MeanExcEnergy_NELEMENTS, and MeanExcEnergy_vals.

◆ MeanExcEnergy_get() [3/3]

double genfit::MeanExcEnergy_get ( TGeoMaterial * mat )

Definition at line 255 of file TGeoMaterialInterface.cc.

References MeanExcEnergy_get().

◆ new_clone()

AbsFitterInfo * genfit::new_clone ( const AbsFitterInfo & a )

inline

Needed for boost cloneability:

Definition at line 108 of file AbsFitterInfo.h.

References genfit::AbsFitterInfo::clone().

◆ operator!=() [1/2]

bool genfit::operator!=	(	const DetPlane &	lhs,
		const DetPlane &	rhs )

Definition at line 262 of file DetPlane.cc.

◆ operator!=() [2/2]

bool genfit::operator!=	(	const Material &	lhs,
		const Material &	rhs )

Definition at line 19 of file Material.cc.

◆ operator==() [1/4]

bool genfit::operator==	(	const DetPlane &	lhs,
		const DetPlane &	rhs )

Definition at line 240 of file DetPlane.cc.

◆ operator==() [2/4]

bool genfit::operator==	(	const Material &	lhs,
		const Material &	rhs )

Definition at line 7 of file Material.cc.

References genfit::Material::A, genfit::Material::density, genfit::Material::mEE, genfit::Material::radiationLength, and genfit::Material::Z.

◆ operator==() [3/4]

bool genfit::operator==	(	const TrackCand &	lhs,
		const TrackCand &	rhs )

Definition at line 191 of file TrackCand.cc.

◆ operator==() [4/4]

bool genfit::operator==	(	const TrackCandHit &	lhs,
		const TrackCandHit &	rhs )

Definition at line 46 of file TrackCandHit.cc.

◆ PlaneToGFDetPlane()

SharedPlanePtr genfit::PlaneToGFDetPlane ( const ravesurf::Plane & rplane )

Definition at line 225 of file GFRaveConverters.cc.

References Point3DToTVector3(), and Vector3DToTVector3().

Referenced by genfit::GFRavePropagator::to().

◆ Point3DToTVector3()

TVector3 genfit::Point3DToTVector3 ( const rave::Point3D & v )

Definition at line 232 of file GFRaveConverters.cc.

Referenced by genfit::GFRavePropagator::closestTo(), PlaneToGFDetPlane(), and RaveToGFVertex().

◆ RaveToGFVertex()

GFRaveVertex * genfit::RaveToGFVertex	(	const rave::Vertex &	raveVertex,
		const std::map< int, genfit::trackAndState > &	IdGFTrackStateMap )

Definition at line 141 of file GFRaveConverters.cc.

References Covariance3DToTMatrixDSym(), Covariance6DToTMatrixDSym(), Point3DToTVector3(), and Vector6DToTVectorD().

Referenced by RaveToGFVertices().

◆ RaveToGFVertices()

void genfit::RaveToGFVertices	(	std::vector< GFRaveVertex * > *	GFVertices,
		const std::vector< rave::Vertex > &	raveVertices,
		const std::map< int, genfit::trackAndState > &	IdGFTrackStateMap )

Definition at line 210 of file GFRaveConverters.cc.

References RaveToGFVertex().

Referenced by genfit::GFRaveVertexFactory::findVertices(), and genfit::GFRaveVertexFactory::findVertices().

◆ setData()

void genfit::setData	(	const rave::Track &	orig,
		MeasuredStateOnPlane *	state )

set state and cov of a MeasuredStateOnPlane according to rave track

Definition at line 131 of file GFRaveConverters.cc.

References Covariance6DToTMatrixDSym(), and genfit::MeasuredStateOnPlane::setPosMomCov().

◆ TMatrixDSymToCovariance3D()

rave::Covariance3D genfit::TMatrixDSymToCovariance3D ( const TMatrixDSym & matrix )

Definition at line 335 of file GFRaveConverters.cc.

Referenced by genfit::GFRaveVertexFactory::setBeamspot().

◆ TVector3ToPoint3D()

rave::Point3D genfit::TVector3ToPoint3D ( const TVector3 & vec )

Definition at line 329 of file GFRaveConverters.cc.

Referenced by genfit::GFRaveVertexFactory::setBeamspot().

◆ Vector3DToTVector3()

TVector3 genfit::Vector3DToTVector3 ( const rave::Vector3D & v )

Definition at line 237 of file GFRaveConverters.cc.

Referenced by PlaneToGFDetPlane().

◆ Vector6DToTVectorD()

TVectorD genfit::Vector6DToTVectorD ( const rave::Vector6D & ravevec )

Definition at line 263 of file GFRaveConverters.cc.

Referenced by RaveToGFVertex().

Variable Documentation

◆ c_monopolePDGCode

const int genfit::c_monopolePDGCode = 99666

Definition at line 32 of file MonopoleConstants.h.

Referenced by genfit::MaterialEffects::dEdx(), genfit::MaterialEffects::drawdEdx(), and genfit::MaterialEffects::effects().

◆ debugOut

std::ostream genfit::debugOut

extern

Default stream for debug output. Defaults to std::cout. Override destination with debugOut.rdbuf(newStream.rdbuf()).

◆ errorOut

std::ostream genfit::errorOut

extern

Default stream for error output. Defaults to std::cerr. Override destination with errorOut.rdbuf(newStream.rdbuf()).

Referenced by genfit::DAF::calcWeights(), genfit::KalmanFitterInfo::checkConsistency(), genfit::FieldManager::checkInitialized(), genfit::FieldManager::checkInstanciated(), genfit::KalmanFitter::fitTrack(), genfit::KalmanFitterRefTrack::prepareTrack(), genfit::DAF::processTrackWithRep(), genfit::KalmanFitter::processTrackWithRep(), genfit::KalmanFitterRefTrack::processTrackWithRep(), genfit::ReferenceStateOnPlane::ReferenceStateOnPlane(), genfit::Track::setCardinalRep(), genfit::MaterialEffects::setMscModel(), and genfit::KalmanFitterInfo::setWeights().

◆ MeanExcEnergy_logs

const double genfit::MeanExcEnergy_logs[MeanExcEnergy_NELEMENTS]

Initial value:

= {
5388, 2.95491, 3.7329, 3.68888, 4.15418, 4.33073, 4.35671, 4.40672, 
55388, 4.74493, 4.91998, 5.00395, 5.04986, 5.11199, 5.15329, 5.15329, 
19296, 5.15906, 5.23644, 5.24702, 5.25227, 5.37528, 5.45104, 5.50126, 
54908, 5.6058, 5.65599, 5.69373, 5.73979, 5.77455, 5.79909, 5.81114, 
85793, 5.84932, 5.8522, 5.83773, 5.86363, 5.8944, 5.90263, 5.93754, 
97381, 6.03309, 6.04973, 6.05912, 6.08904, 6.10702, 6.15273, 6.15273, 
1506, 6.19032, 6.19032, 6.18826, 6.18415, 6.19644, 6.17794, 6.19032, 
19644, 6.21661, 6.25958, 6.28227, 6.30262, 6.32794, 6.35263, 6.36303, 
38182, 6.41999, 6.44254, 6.47697, 6.4892, 6.51323, 6.52796, 6.54247, 
5582, 6.57647, 6.58893, 6.60123, 6.61473, 6.62936, 6.67203, 6.67203, 
68461, 6.69703, 6.71296, 6.71296, 6.72143, 6.71538, 6.67708, 6.7178, 
71659, 6.73459, 6.7417, 6.77765, 6.79122, }

Definition at line 229 of file TGeoMaterialInterface.cc.

Referenced by MeanExcEnergy_get().

◆ MeanExcEnergy_NELEMENTS

const int genfit::MeanExcEnergy_NELEMENTS = 93

Definition at line 214 of file TGeoMaterialInterface.cc.

Referenced by MeanExcEnergy_get().

◆ MeanExcEnergy_vals

const double genfit::MeanExcEnergy_vals[MeanExcEnergy_NELEMENTS]

Initial value:

= {
e15, 19.2, 41.8, 40.0, 63.7, 76.0, 78., 82.0,
0, 115.0, 137.0, 149.0, 156.0, 166.0, 173.0, 173.0,
0, 174.0, 188.0, 190.0, 191.0, 216.0, 233.0, 245.0,
0, 272.0, 286.0, 297.0, 311.0, 322.0, 330.0, 334.0,
0, 347.0, 348.0, 343.0, 352.0, 363.0, 366.0, 379.0,
0, 417.0, 424.0, 428.0, 441.0, 449.0, 470.0, 470.0,
0, 488.0, 488.0, 487.0, 485.0, 491.0, 482.0, 488.0,
0, 501.0, 523.0, 535.0, 546.0, 560.0, 574.0, 580.0,
0, 614.0, 628.0, 650.0, 658.0, 674.0, 684.0, 694.0,
0, 718.0, 727.0, 736.0, 746.0, 757.0, 790.0, 790.0,
0, 810.0, 823.0, 823.0, 830.0, 825.0, 794.0, 827.0,
0, 841.0, 847.0, 878.0, 890.0, }

Definition at line 215 of file TGeoMaterialInterface.cc.

Referenced by MeanExcEnergy_get().

◆ printOut

std::ostream genfit::printOut

extern

Default stream for output of Print calls. Defaults to std::cout. Override destination with printOut.rdbuf(newStream.rdbuf()).

Referenced by genfit::AbsMeasurement::Print(), genfit::AbsTrackRep::Print(), genfit::DetPlane::Print(), genfit::FitStatus::Print(), genfit::HMatrixPhi::Print(), genfit::HMatrixU::Print(), genfit::HMatrixUnit::Print(), genfit::HMatrixUV::Print(), genfit::HMatrixV::Print(), genfit::KalmanFitStatus::Print(), genfit::KalmanFitterInfo::Print(), genfit::Material::Print(), genfit::MeasuredStateOnPlane::Print(), genfit::MeasurementOnPlane::Print(), genfit::PruneFlags::Print(), genfit::RectangularFinitePlane::Print(), genfit::ReferenceStateOnPlane::Print(), genfit::StateOnPlane::Print(), genfit::StepLimits::Print(), genfit::ThinScatterer::Print(), genfit::Track::Print(), genfit::TrackCand::Print(), genfit::TrackCandHit::Print(), genfit::TrackPoint::Print(), genfit::WireTrackCandHit::Print(), and genfit::RKTools::printDim().

Namespaces

Classes

Typedefs

Enumerations

Functions

Variables

Detailed Description

Typedef Documentation

◆ M1x3

◆ M1x4

◆ M1x7

◆ M5x5

◆ M5x6

◆ M5x7

◆ M6x5

◆ M6x6

◆ M7x5

◆ M7x7

◆ SharedPlanePtr

Enumeration Type Documentation

◆ eFitterType

◆ eMeasurementType

◆ eMultipleMeasurementHandling

◆ StepLimitType

Function Documentation

◆ calcAverageState()

◆ Covariance3DToTMatrixDSym()

◆ Covariance6DToTMatrixDSym()

◆ GFTracksToTracks()

◆ GFTrackToTrack()

◆ MeanExcEnergy_get() [1/3]

◆ MeanExcEnergy_get() [2/3]

◆ MeanExcEnergy_get() [3/3]

◆ new_clone()

◆ operator!=() [1/2]

◆ operator!=() [2/2]

◆ operator==() [1/4]

◆ operator==() [2/4]

◆ operator==() [3/4]

◆ operator==() [4/4]

◆ PlaneToGFDetPlane()

◆ Point3DToTVector3()

◆ RaveToGFVertex()

◆ RaveToGFVertices()

◆ setData()

◆ TMatrixDSymToCovariance3D()

◆ TVector3ToPoint3D()

◆ Vector3DToTVector3()

◆ Vector6DToTVectorD()

Variable Documentation

◆ c_monopolePDGCode

◆ debugOut

◆ errorOut

◆ MeanExcEnergy_logs

◆ MeanExcEnergy_NELEMENTS

◆ MeanExcEnergy_vals

◆ printOut